vishay general semiconductor tgl41-6.8 thru tgl41-200a document number 88403 05-sep-06 www.vishay.com 1 surface mount t rans z orb ? transient voltage suppressors features ? plastic melf package ? ideal for automated placement ? glass passivated chip junction ? available in unidirectional polarity only ? 400 w peak pulse power capability with a 10/1000 s waveform, repet itive rate (duty cycle): 0.01 % (200 w above 91 v) ? excellent clamping capability ? very fast response time ? low incremental surge resistance ? typical i d less than 1 a above 10 v rating ? meets msl level 1, per j-std-020c, lf max peak of 250 c ? solder dip 260 c, 40 seconds ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ics, mosfet, signal lines of sensor units for consumer, computer, industrial and telecommunication. mechanical data case: do-213ab (gl41) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002b and jesd22-b102d e3 suffix for commercial grade polarity: blue band denotes the cathode which is positive with respect to the anode under normal tvs operation. do-213ab (gl41) major ratings and characteristics v br 6.8 v to 200 v p ppm 400 w, 200 w p d 1.0 w i fsm 40 a t j max. 150 c note: (1) non-repetitive current pulse, per fig. 3 and derated above t a = 25 c per fig. 2. rating is 200 w above 91 v (2) measured at 8.3 ms single half si ne-wave or equivalent square wave dut y cycle = 4 pulses per minute maximum maximum ratings (t a = 25 c unless otherwise noted) parameter symbo value unit peak pulse power dissipatio n with a 10/1000 s waveform (1) (fig. 1) p ppm minimum 400 w power dissipation on infi nite heatsink at t l = 75 c p d 1.0 w peak pulse current with a 10/1000 s waveform (1) (fig. 3) i ppm see next table a peak forward surge current, 8.3 ms si ngle half sine-wave unidirectional only (2) i fsm 40 a maximum instantaneous forward voltage at 25 a for unidirectional only v f 3.5 v operating junction and storage temperature range t j , t stg - 55 to + 150 c
www.vishay.com 2 document number 88403 05-sep-06 vishay general semiconductor tgl41-6.8 thru tgl41-200a electrical characteristics (t a = 25 c unless otherwise noted) device type breakdown voltage v br (v) (1) test current at i t (ma) stand- off voltage v wm (v) maximum reverse leakage at v wm i d (a) maximum peak pulse current i ppm (a) (2) maximum clamping voltage at i ppm v c (v) maximum temperature coefficient of v br (%/c) min max tgl41-6.8 6.12 7.48 10 5.50 1000 37.0 10.8 0.060 tgl41-6.8a 6.45 7.14 10 5.80 1000 38.1 10.5 0.060 tgl41-7.5 6.75 8.25 10 6.05 500 34.2 11.7 0.064 tgl41-7.5a 7.13 7.88 10 6.40 500 35.4 11.3 0.064 tgl41-8.2 7.38 9.02 10 6.63 200 32.0 12.5 0.068 tgl41-8.2a 7.79 8.61 10 7.02 200 33.1 12.1 0.068 tgl41-9.1 8.19 10.0 1.0 7.37 50.0 29.0 13.8 0.071 tgl41-9.1a 8.65 9.55 1.0 7.78 50.0 29.9 13.4 0.071 tgl41 -10 9.00 11.0 1.0 8.10 10.0 26.7 15.0 0.076 tgl41 -10a 9.50 10.5 1.0 8.55 10.0 27.6 14.5 0.076 tgl41 -11 9.90 12.1 1.0 8.92 5.0 24.7 16.2 0.078 tgl41 -11a 10.5 11.6 1.0 9.40 5.0 25.6 15.6 0.078 tgl41-12 10.8 13.2 1.0 9.72 5.0 23.1 17.3 0.081 tgl41-12a 11.4 12.6 1.0 10.2 5.0 24.0 16.7 0.081 tgl41-13 11.7 14.3 1.0 10.5 5.0 21.1 19.0 0.084 tgl41-13a 12.4 13.7 1.0 11.1 5.0 22.0 18.2 0.084 tgl41-15 13.5 16.5 1.0 12.1 5.0 18.2 22.0 0.087 tgl41-15a 14.3 15.8 1.0 12.8 5.0 18.9 21.2 0.087 tgl41-16 14.4 17.6 1.0 12.9 5.0 17.0 23.5 0.089 tgl41-16a 15.2 16.8 1.0 13.6 5.0 17.8 22.5 0.089 tgl41-18 16.2 19.8 1.0 14.5 5.0 15.1 26.5 0.091 tgl41-18a 17.1 18.9 1.0 15.3 5.0 15.9 25.2 0.091 tgl41-20 18.0 22.0 1.0 16.2 5.0 13.7 29.1 0.093 tgl41-20a 19.0 21.0 1.0 17.1 5.0 14.4 27.7 0.093 tgl41-22 19.8 24.2 1.0 17.8 5.0 12.5 31.9 0.095 tgl41-22a 20.9 23.1 1.0 18.8 5.0 13.1 30.6 0.095 tgl41-24 21.6 26.4 1.0 19.4 5.0 11.5 34.7 0.097 tgl41-24a 22.8 25.2 1.0 20.5 5.0 12.0 33.2 0.097 tgl41-27 24.3 29.7 1.0 21.8 5.0 10.2 39.1 0.099 tgl41-27a 25.7 28.4 1.0 23.1 5.0 10.7 37.5 0.099 tgl41-30 27.0 33.0 1.0 24.3 5.0 9.2 43.5 0.100 tgl41-30a 28.5 31.5 1.0 25.6 5.0 9.7 41.4 0.100 tgl41-33 29.7 36.3 1.0 26.8 5.0 8.4 47.7 0.101 tgl41-33a 31.4 34.7 1.0 28.2 5.0 8.8 45.7 0.101 tgl41-36 32.4 39.6 1.0 29.1 5.0 7.7 52.0 0.102 tgl41-36a 34.2 37.8 1.0 30.8 5.0 8.0 49.9 0.102 tgl41-39 35.1 42.9 1.0 31.6 5.0 7.1 56.4 0.103 tgl41-39a 37.1 41.0 1.0 33.3 5.0 7.4 53.9 0.103 tgl41-43 38.7 47.3 1.0 34.8 5.0 6.5 61.9 0.104 tgl41-43a 40.9 45.2 1.0 36.8 5.0 6.7 59.3 0.104 tgl41-47 42.3 51.7 1.0 38.1 5.0 5.9 67.8 0.104 tgl41-47a 44.7 49.4 1.0 40.2 5.0 6.2 64.8 0.104
document number 88403 05-sep-06 www.vishay.com 3 tgl41-6.8 thru tgl41-200a vishay general semiconductor note: (1) pulse test: t p 50 ms (2) surge current waveform per fig. 3 and derate per fig. 2 (3) all terms and symbols are consistent with ansi/ieee c62.35 tgl41-51 45.9 56.1 1.0 41.3 5.0 5.4 73.5 0.105 tgl41-51a 48.5 53.6 1.0 43.6 5.0 5.7 70.1 0.105 tgl41-56 50.4 61.6 1.0 45.4 5.0 5.0 80.5 0.106 tgl41-56a 53.2 58.8 1.0 47.8 5.0 5.2 77.0 0.106 tgl41-62 55.8 68.2 1.0 50.2 5.0 4.5 89.0 0.107 tgl41-62a 58.9 65.1 1.0 53.0 5.0 4.7 85.0 0.107 tgl41-68 61.2 74.8 1.0 55.1 5.0 4.1 98.0 0.107 tgl41-68a 64.6 71.4 1.0 58.1 5.0 4.3 92.0 0.107 tgl41-75 67.5 82.5 1.0 60.7 5.0 3.7 108 0.108 tgl41-75a 71.3 78.8 1.0 64.1 5.0 3.9 103 0.108 tgl41-82 73.8 90.2 1.0 66.4 5.0 3.4 118 0.108 tgl41-82a 77.9 86.1 1.0 70.1 5.0 3.5 113 0.108 tgl41-91 81.9 100 1.0 73.7 5.0 3.1 131 0.109 tgl41-91a 86.5 95.5 1.0 77.8 5.0 3.2 125 0.109 tgl41-100 90.0 110 1.0 81.0 5.0 1.39 144 0.109 tgl41-100a 95.0 105 1.0 85.5 5.0 1.46 137 0.109 tgl41-110 99.0 121 1.0 89.2 5.0 1.27 158 0.110 tgl41-110a 105 116 1.0 94.0 5.0 1.32 152 0.110 tgl41-120 108 132 1.0 97.2 5.0 1.16 173 0.110 tgl41-120a 114 126 1.0 102 5.0 1.21 165 0.110 tgl41-130 117 143 1.0 105 5.0 1.07 187 0.110 tgl41-130a 124 137 1.0 111 5.0 1.12 179 0.110 tgl41-150 135 165 1.0 121 5.0 0.93 215 0.111 tgl41-150a 143 158 1.0 128 5.0 0.97 207 0.111 tgl41-160 144 176 1.0 130 5.0 0.87 230 0.111 tgl41-160a 152 168 1.0 136 5.0 0.91 219 0.111 tgl41-170 153 187 1.0 138 5.0 0.82 244 0.111 tgl41-170a 162 179 1.0 145 5.0 0.85 234 0.111 tgl41-180 162 198 1.0 146 5.0 0.78 258 0.111 tgl41-180a 171 189 1.0 154 5.0 0.81 246 0.111 tgl41-200 180 220 1.0 162 5.0 0.70 287 0.111 tgl41-200a 190 210 1.0 171 5.0 0.73 274 0.111 electrical characteristics (t a = 25 c unless otherwise noted) device type breakdown voltage v br (v) (1) test current at i t (ma) stand- off voltage v wm (v) maximum reverse leakage at v wm i d (a) maximum peak pulse current i ppm (a) (2) maximum clamping voltage at i ppm v c (v) maximum temperature coefficient of v br (%/c) min max ordering information preferred p/n unit weight (g) preferred package code base quantity delivery mode tgl41-6.8a-e3/96 0.134 96 1500 7" diameter plastic tape & reel tgl41-6.8a-e3/97 0.134 97 5000 13" diameter plastic tape & reel
www.vishay.com 4 document number 88403 05-sep-06 vishay general semiconductor tgl41-6.8 thru tgl41-200a ratings and characteristics curves (t a = 25 c unless otherwise specified) figure 1. peak pulse power rating curve figure 2. pulse power or current versus initial junction temperature figure 3. pulse waveform 0.1 1.0 10 100 tgl41-6. 8 tgl91a tgl41-100 tgl200a p ppm - peak p u lse p o w er (k w ) td - p u lse w idth (s) n on-repetiti v e p u lse w a v eform sho w n in fig. 3 t a = 25 c 0.1 s 1.0 s 10 s 100 s 1.0 ms 10 ms 0 25 50 75 100 100 75 50 25 0 125 150 175 200 t j - initial temperat u re (c) peak p u lse po w er (p pp ) or c u rrent (i pp ) derating in percentage, % 0 50 100 150 td 0 1.0 2.0 3.0 4.0 i ppm - peak p u lse c u rrent, % i rsm t - time (ms) tr = 10 sec peak v al u e i ppm half v al u e - i ppm ipp 2 10/1000 sec w a v eform as defined b y r.e.a. t j = 25 c p u lse w idth (td) is defined as the point w here the peak c u rrent decays to 50 % of i ppm figure 4. typical junction capacitance figure 5. power derating curve figure 6. maximum non-repetitive peak forward surge current unidirectional only 1.0 10 100 200 10 100 1000 10000 unidirectional c j - j u nction capacitance (pf) v (br) - breakdo w n v oltage ( v ) t j = 25 c f = 1.0 mhz v s q = 50 m v p-p meas u red at zero bias meas u red at stand-off v oltage v w m 0 50 100 150 200 0 0.25 0.50 0.75 1.00 25 75 125 175 t l , lead temperat u re (c) p d , po w er dissipa tion ( w ) 1 10 100 0 20 40 10 30 50 t j = t j max. 8 .3 ms single half sine- w a v e nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a)
vishay general semiconductor tgl41-6.8 thru tgl41-200a document number 88403 05-sep-06 www.vishay.com 5 package outline dimensions in inches (millimeters) d1 = 0.105 0.095 (2.67) (2.41) 0.205 (5.2) 0.1 8 5 (4.7) + 0 - 0.00 8 (0.20) d2 0.022 (0.56) 0.01 8 (0.46) 0.022 (0.56) 0.01 8 (0.46) do-213ab (gl41) solderable e n ds 1st band d2 = d1 1st b and denotes type and positi v e end (cathode) 0.13 8 max (3.5) max 0.049 mi n (1.25) mi n 0.11 8 mi n (3.0) mi n 0.23 8 (6.0) ref mountin g pad layout
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
